New Tech Industries

Copra cutter is used for cutting of dry copra into small pieces for extracting of coconut oil. The dry copra fed to this machine through the hopper provided. Once the copra passes through the blade and cuts into small pieces.This machine is available in different capacity

Teachnical Features:

• Robost & Rigid construction
• No blockage & easy cleaning
• Achieve small size of pieces ranging from 1/2" to 1"
• Easy maintenance
• Very long life blade.
•  Easy and safe to operate. 

   

Specifications:

Price Range: 50,000 to 3Lakh.

 

Copra Dryer is a specially designed drying unit to convert coconut into copra.

This is an Air to Air tubular heat exchanger system. Where the normal atmosphere temperature enter inside the heating chamber converts into hot air and blown inside the dryer room. 

WORKING SYSTEM

1. The coconuts are cut into two pieces and kept inside one room.

2. Fire the heat exchanger then switch on the blower.

3. After attaining required temperature blow hot air inside the room for 10 to 14 hours.

4. Once it is partially dried. Remove the outer shell of the coconut.

5. Keep the coconut inside the room for second stage drying after removing the shell.

6. Depending on type of coconut and moisture blow hot air to dry for about 8 to 12 hours.

7. Your copra is ready. Slice the top layer and pack as required. 


Technical Advantages of Tubular Dryer:

• Easy to control & maintain required temperature.
• Sources of fuel : Wood waste, Coconut shell, Agro waste also coconut husk.
• Easy maintnance & repair.
• High pressure blower. CFM Ranging from 1000 to 20000 CFM.
• Heavy construction, long life.
• Easy to clean.
• No blockage in chimney.
• Low fuel consumption.
• Available from 500 coconuts to 10000 coconuts per batch.
• Double copra drying chamber system. 
• Maximum operating temperature 125°C

   

Specifications:

Price Range: 1Lakh to 5Lakh.

Coconut breaker is used for breaking or cutting of whole dry coconut into two half pieces. This machine is used for temples, copra manufacturers.

This machine had a manual feeding system once the coconut is kept inside the rotating wheel. The coconut passes through the blade and cuts into two pieces. Machine is available with Single head or Double head system.

Technical Features:

• Easy and safe to operate.

• Water sprayer for cleaning of coconut while cutting. 

• Water and coconut separator system.

• Easy replacement of blade.

• Available in single and double head system.

• Clear cutting of coconut into two half’s.

Specifications: